Problem beim flashen…

Konnte die Firmware nun erfolgreich flashen, der trick war folgender:
Reset taste solange gedrückt halten bis connecting steht, dann loslassen….
Dann läufts durch….
Leider nun der nächste fehler:


E [19024] SD-Karte konnte nicht gemountet werden.
E (19557) sdmmc_common: sdmmc_init_ocr: send_op_cond (1) returned 0x107
E (19558) vfs_fat_sdmmc: sdmmc_card_init failed (0x107).
[ 19562][E][SD_MMC.cpp:148] begin(): Failed to initialize the card (0x107). Make sure SD card lines have pull-up resistors in place.
E [19574] SD-Karte konnte nicht gemountet werden.
E [20084] Bootgang wegen SD fehlgeschlagen. Gehe in Deepsleep...
ets Jul 29 2019 12:21:46

rst:0x5 (DEEPSLEEP_RESET),boot:0x17 (SPI_FAST_FLASH_BOOT)
configsip: 0, SPIWP:0xee
clk_drv:0x00,q_drv:0x00,d_drv:0x00,cs0_drv:0x00,hd_drv:0x00,wp_drv:0x00
mode:DIO, clock div:2
load:0x3fff0030,len:1344
load:0x40078000,len:14464
load:0x40080400,len:3652
entry 0x400805f0
E (55) esp_core_dump_flash: No core dump partition found!
E (55) esp_core_dump_flash: No core dump partition found!
I [96] Maximale Inaktivitätszeit wurde aus NVS geladen: 10 Minuten
D [147] RFID-Tags koennen jetzt gescannt werden...
N [148] Port-expander gefunden
N [150] Interrupt für Port-Expander aktiviert
I [151] Zyklus für Batteriemessung fuer Neopixel-Anzeige aus NVS geladen: 10 Minuten
I [162] Unterer Spannungslevel (Batterie) fuer Neopixel-Anzeige aus NVS geladen: 3.00V
I [174] Oberer Spannungslevel (Batterie) fuer Neopixel-Anzeige aus NVS geladen: 4.20V
I [175] Spannungslevel (Batterie) fuer Niedrig-Warnung via Neopixel aus NVS geladen: 3.40V
I [186] Spannungslevel (Batterie) fuer Kritisch-Warnung via Neopixel aus NVS geladen: 3.10V
E [187] Lautstärke vor dem letzten Shutdown wird wiederhergestellt. Dies überschreibt die Einstellung der initialen Lautstärke aus der GUI.
I [207] Initiale Lautstärke wurde aus NVS geladen: 3
E [208] Maximale Lautstärke für Lautsprecher wurde ins NVS geschrieben.
E [219] Maximale Lautstärke für Kopfhörer wurde ins NVS geschrieben.
N [219] Lautsprecher ausgeschaltet
I [230] Maximale Lautstärke wurde gesetzt auf: 11
N [231] Neuer Modus: stereo
I [283] Initiale LED-Helligkeit wurde aus NVS geladen: 16
I [283] LED-Helligkeit für Nachtmodus wurde aus NVS geladen: 2
E (307) sdmmc_common: sdmmc_init_ocr: send_op_cond (1) returned 0x107
E (308) vfs_fat_sdmmc: sdmmc_card_init failed (0x107).
[   312][E][SD_MMC.cpp:148] begin(): Failed to initialize the card (0x107). Make sure SD card lines have pull-up resistors in place.
E [323] SD-Karte konnte nicht gemountet werden.
E (857) sdmmc_common: sdmmc_init_ocr: send_op_cond (1) returned 0x107
E (858) vfs_fat_sdmmc: sdmmc_card_init failed (0x107).
[   862][E][SD_MMC.cpp:148] begin(): Failed to initialize the card (0x107). Make sure SD card lines have pull-up resistors in place.
E [873] SD-Karte konnte nicht gemountet werden.
E (1407) sdmmc_common: sdmmc_init_ocr: send_op_cond (1) returned 0x107
E (1408) vfs_fat_sdmmc: sdmmc_card_init failed (0x107).
[  1412][E][SD_MMC.cpp:148] begin(): Failed to initialize the card (0x107). Make sure SD card lines have pull-up resistors in place.
E [1423] SD-Karte konnte nicht gemountet werden.
E (1957) sdmmc_common: sdmmc_init_ocr: send_op_cond (1) returned 0x107
E (1958) vfs_fat_sdmmc: sdmmc_card_init failed (0x107).
[  1962][E][SD_MMC.cpp:148] begin(): Failed to initialize the card (0x107). Make sure SD card lines have pull-up resistors in place.
E [1973] SD-Karte konnte nicht gemountet werden.
E (2507) sdmmc_common: sdmmc_init_ocr: send_op_cond (1) returned 0x107
E (2508) vfs_fat_sdmmc: sdmmc_card_init failed (0x107).
[  2512][E][SD_MMC.cpp:148] begin(): Failed to initialize the card (0x107). Make sure SD card lines have pull-up resistors in place.
E [2524] SD-Karte konnte nicht gemountet werden.
E (3057) sdmmc_common: sdmmc_init_ocr: send_op_cond (1) returned 0x107
E (3058) vfs_fat_sdmmc: sdmmc_card_init failed (0x107).
[  3062][E][SD_MMC.cpp:148] begin(): Failed to initialize the card (0x107). Make sure SD card lines have pull-up resistors in place.
E [3073] SD-Karte konnte nicht gemountet werden.
E (3607) sdmmc_common: sdmmc_init_ocr: send_op_cond (1) returned 0x107
E (3608) vfs_fat_sdmmc: sdmmc_card_init failed (0x107).
[  3612][E][SD_MMC.cpp:148] begin(): Failed to initialize the card (0x107). Make sure SD card lines have pull-up resistors in place.
E [3623] SD-Karte konnte nicht gemountet werden.
E (4157) sdmmc_common: sdmmc_init_ocr: send_op_cond (1) returned 0x107
E (4158) vfs_fat_sdmmc: sdmmc_card_init failed (0x107).
[  4162][E][SD_MMC.cpp:148] begin(): Failed to initialize the card (0x107). Make sure SD card lines have pull-up resistors in place.
E [4174] SD-Karte konnte nicht gemountet werden.
E (4707) sdmmc_common: sdmmc_init_ocr: send_op_cond (1) returned 0x107
E (4708) vfs_fat_sdmmc: sdmmc_card_init failed (0x107).
[  4712][E][SD_MMC.cpp:148] begin(): Failed to initialize the card (0x107). Make sure SD card lines have pull-up resistors in place.
E [4723] SD-Karte konnte nicht gemountet werden.
E (5257) sdmmc_common: sdmmc_init_ocr: send_op_cond (1) returned 0x107
E (5258) vfs_fat_sdmmc: sdmmc_card_init failed (0x107).
[  5262][E][SD_MMC.cpp:148] begin(): Failed to initialize the card (0x107). Make sure SD card lines have pull-up resistors in place.
E [5273] SD-Karte konnte nicht gemountet werden.
E (5807) sdmmc_common: sdmmc_init_ocr: send_op_cond (1) returned 0x107
E (5808) vfs_fat_sdmmc: sdmmc_card_init failed (0x107).
[  5812][E][SD_MMC.cpp:148] begin(): Failed to initialize the card (0x107). Make sure SD card lines have pull-up resistors in place.
E [5823] SD-Karte konnte nicht gemountet werden.
E (6357) sdmmc_common: sdmmc_init_ocr: send_op_cond (1) returned 0x107
E (6358) vfs_fat_sdmmc: sdmmc_card_init failed (0x107).
[  6362][E][SD_MMC.cpp:148] begin(): Failed to initialize the card (0x107). Make sure SD card lines have pull-up resistors in place.
E [6373] SD-Karte konnte nicht gemountet werden.
E (6907) sdmmc_common: sdmmc_init_ocr: send_op_cond (1) returned 0x107
E (6908) vfs_fat_sdmmc: sdmmc_card_init failed (0x107).
[  6912][E][SD_MMC.cpp:148] begin(): Failed to initialize the card (0x107). Make sure SD card lines have pull-up resistors in place.
E [6924] SD-Karte konnte nicht gemountet werden.
E (7457) sdmmc_common: sdmmc_init_ocr: send_op_cond (1) returned 0x107
E (7458) vfs_fat_sdmmc: sdmmc_card_init failed (0x107).
[  7462][E][SD_MMC.cpp:148] begin(): Failed to initialize the card (0x107). Make sure SD card lines have pull-up resistors in place.
E [7473] SD-Karte konnte nicht gemountet werden.
E (8007) sdmmc_common: sdmmc_init_ocr: send_op_cond (1) returned 0x107
E (8008) vfs_fat_sdmmc: sdmmc_card_init failed (0x107).
[  8012][E][SD_MMC.cpp:148] begin(): Failed to initialize the card (0x107). Make sure SD card lines have pull-up resistors in place.
E [8023] SD-Karte konnte nicht gemountet werden.
E (8557) sdmmc_common: sdmmc_init_ocr: send_op_cond (1) returned 0x107
E (8558) vfs_fat_sdmmc: sdmmc_card_init failed (0x107).
[  8562][E][SD_MMC.cpp:148] begin(): Failed to initialize the card (0x107). Make sure SD card lines have pull-up resistors in place.
E [8573] SD-Karte konnte nicht gemountet werden.
E (9107) sdmmc_common: sdmmc_init_ocr: send_op_cond (1) returned 0x107
E (9108) vfs_fat_sdmmc: sdmmc_card_init failed (0x107).
[  9112][E][SD_MMC.cpp:148] begin(): Failed to initialize the card (0x107). Make sure SD card lines have pull-up resistors in place.
E [9124] SD-Karte konnte nicht gemountet werden.
E (9657) sdmmc_common: sdmmc_init_ocr: send_op_cond (1) returned 0x107
E (9658) vfs_fat_sdmmc: sdmmc_card_init failed (0x107).
[  9662][E][SD_MMC.cpp:148] begin(): Failed to initialize the card (0x107). Make sure SD card lines have pull-up resistors in place.
E [9673] SD-Karte konnte nicht gemountet werden.
E (10207) sdmmc_common: sdmmc_init_ocr: send_op_cond (1) returned 0x107
E (10208) vfs_fat_sdmmc: sdmmc_card_init failed (0x107).
[ 10212][E][SD_MMC.cpp:148] begin(): Failed to initialize the card (0x107). Make sure SD card lines have pull-up resistors in place.
E [10224] SD-Karte konnte nicht gemountet werden.
E (10757) sdmmc_common: sdmmc_init_ocr: send_op_cond (1) returned 0x107
E (10758) vfs_fat_sdmmc: sdmmc_card_init failed (0x107).
[ 10762][E][SD_MMC.cpp:148] begin(): Failed to initialize the card (0x107). Make sure SD card lines have pull-up resistors in place.
E [10774] SD-Karte konnte nicht gemountet werden.
E (11307) sdmmc_common: sdmmc_init_ocr: send_op_cond (1) returned 0x107
E (11308) vfs_fat_sdmmc: sdmmc_card_init failed (0x107).
[ 11312][E][SD_MMC.cpp:148] begin(): Failed to initialize the card (0x107). Make sure SD card lines have pull-up resistors in place.
E [11324] SD-Karte konnte nicht gemountet werden.
E (11857) sdmmc_common: sdmmc_init_ocr: send_op_cond (1) returned 0x107
E (11858) vfs_fat_sdmmc: sdmmc_card_init failed (0x107).
[ 11862][E][SD_MMC.cpp:148] begin(): Failed to initialize the card (0x107). Make sure SD card lines have pull-up resistors in place.
E [11874] SD-Karte konnte nicht gemountet werden.
E (12407) sdmmc_common: sdmmc_init_ocr: send_op_cond (1) returned 0x107
E (12408) vfs_fat_sdmmc: sdmmc_card_init failed (0x107).
[ 12412][E][SD_MMC.cpp:148] begin(): Failed to initialize the card (0x107). Make sure SD card lines have pull-up resistors in place.
E [12424] SD-Karte konnte nicht gemountet werden.
E (12957) sdmmc_common: sdmmc_init_ocr: send_op_cond (1) returned 0x107
E (12958) vfs_fat_sdmmc: sdmmc_card_init failed (0x107).
[ 12962][E][SD_MMC.cpp:148] begin(): Failed to initialize the card (0x107). Make sure SD card lines have pull-up resistors in place.
E [12974] SD-Karte konnte nicht gemountet werden.
E (13507) sdmmc_common: sdmmc_init_ocr: send_op_cond (1) returned 0x107
E (13508) vfs_fat_sdmmc: sdmmc_card_init failed (0x107).
[ 13512][E][SD_MMC.cpp:148] begin(): Failed to initialize the card (0x107). Make sure SD card lines have pull-up resistors in place.
E [13524] SD-Karte konnte nicht gemountet werden.
E (14057) sdmmc_common: sdmmc_init_ocr: send_op_cond (1) returned 0x107
E (14058) vfs_fat_sdmmc: sdmmc_card_init failed (0x107).
[ 14062][E][SD_MMC.cpp:148] begin(): Failed to initialize the card (0x107). Make sure SD card lines have pull-up resistors in place.
E [14074] SD-Karte konnte nicht gemountet werden.
E (14607) sdmmc_common: sdmmc_init_ocr: send_op_cond (1) returned 0x107
E (14608) vfs_fat_sdmmc: sdmmc_card_init failed (0x107).
[ 14612][E][SD_MMC.cpp:148] begin(): Failed to initialize the card (0x107). Make sure SD card lines have pull-up resistors in place.
E [14624] SD-Karte konnte nicht gemountet werden.
E (15157) sdmmc_common: sdmmc_init_ocr: send_op_cond (1) returned 0x107
E (15158) vfs_fat_sdmmc: sdmmc_card_init failed (0x107).
[ 15162][E][SD_MMC.cpp:148] begin(): Failed to initialize the card (0x107). Make sure SD card lines have pull-up resistors in place.
E [15174] SD-Karte konnte nicht gemountet werden.
E (15707) sdmmc_common: sdmmc_init_ocr: send_op_cond (1) returned 0x107
E (15708) vfs_fat_sdmmc: sdmmc_card_init failed (0x107).
[ 15712][E][SD_MMC.cpp:148] begin(): Failed to initialize the card (0x107). Make sure SD card lines have pull-up resistors in place.
E [15724] SD-Karte konnte nicht gemountet werden.
E (16257) sdmmc_common: sdmmc_init_ocr: send_op_cond (1) returned 0x107
E (16258) vfs_fat_sdmmc: sdmmc_card_init failed (0x107).
[ 16262][E][SD_MMC.cpp:148] begin(): Failed to initialize the card (0x107). Make sure SD card lines have pull-up resistors in place.
E [16274] SD-Karte konnte nicht gemountet werden.
E (16807) sdmmc_common: sdmmc_init_ocr: send_op_cond (1) returned 0x107
E (16808) vfs_fat_sdmmc: sdmmc_card_init failed (0x107).
[ 16812][E][SD_MMC.cpp:148] begin(): Failed to initialize the card (0x107). Make sure SD card lines have pull-up resistors in place.
E [16824] SD-Karte konnte nicht gemountet werden.
E (17357) sdmmc_common: sdmmc_init_ocr: send_op_cond (1) returned 0x107
E (17358) vfs_fat_sdmmc: sdmmc_card_init failed (0x107).
[ 17362][E][SD_MMC.cpp:148] begin(): Failed to initialize the card (0x107). Make sure SD card lines have pull-up resistors in place.
E [17374] SD-Karte konnte nicht gemountet werden.
E (17907) sdmmc_common: sdmmc_init_ocr: send_op_cond (1) returned 0x107
E (17908) vfs_fat_sdmmc: sdmmc_card_init failed (0x107).
[ 17912][E][SD_MMC.cpp:148] begin(): Failed to initialize the card (0x107). Make sure SD card lines have pull-up resistors in place.
E [17924] SD-Karte konnte nicht gemountet werden.
E (18457) sdmmc_common: sdmmc_init_ocr: send_op_cond (1) returned 0x107
E (18458) vfs_fat_sdmmc: sdmmc_card_init failed (0x107).
[ 18462][E][SD_MMC.cpp:148] begin(): Failed to initialize the card (0x107). Make sure SD card lines have pull-up resistors in place.
E [18474] SD-Karte konnte nicht gemountet werden.
E (19007) sdmmc_common: sdmmc_init_ocr: send_op_cond (1) returned 0x107
E (19008) vfs_fat_sdmmc: sdmmc_card_init failed (0x107).
[ 19012][E][SD_MMC.cpp:148] begin(): Failed to initialize the card (0x107). Make sure SD card lines have pull-up resistors in place.
E [19024] SD-Karte konnte nicht gemountet werden.
E (19557) sdmmc_common: sdmmc_init_ocr: send_op_cond (1) returned 0x107
E (19558) vfs_fat_sdmmc: sdmmc_card_init failed (0x107).
[ 19562][E][SD_MMC.cpp:148] begin(): Failed to initialize the card (0x107). Make sure SD card lines have pull-up resistors in place.
E [19574] SD-Karte konnte nicht gemountet werden.
E [20084] Bootgang wegen SD fehlgeschlagen. Gehe in Deepsleep...
ets Jul 29 2019 12:21:46

rst:0x5 (DEEPSLEEP_RESET),boot:0x17 (SPI_FAST_FLASH_BOOT)
configsip: 0, SPIWP:0xee
clk_drv:0x00,q_drv:0x00,d_drv:0x00,cs0_drv:0x00,hd_drv:0x00,wp_drv:0x00
mode:DIO, clock div:2
load:0x3fff0030,len:1344
load:0x40078000,len:14464
load:0x40080400,len:3652
entry 0x400805f0
E (55) esp_core_dump_flash: No core dump partition found!
E (55) esp_core_dump_flash: No core dump partition found!
I [97] Maximale Inaktivitätszeit wurde aus NVS geladen: 10 Minuten
D [147] RFID-Tags koennen jetzt gescannt werden...
N [148] Port-expander gefunden
N [150] Interrupt für Port-Expander aktiviert
I [151] Zyklus für Batteriemessung fuer Neopixel-Anzeige aus NVS geladen: 10 Minuten
I [162] Unterer Spannungslevel (Batterie) fuer Neopixel-Anzeige aus NVS geladen: 3.00V
I [174] Oberer Spannungslevel (Batterie) fuer Neopixel-Anzeige aus NVS geladen: 4.20V
I [175] Spannungslevel (Batterie) fuer Niedrig-Warnung via Neopixel aus NVS geladen: 3.40V
I [186] Spannungslevel (Batterie) fuer Kritisch-Warnung via Neopixel aus NVS geladen: 3.10V
E [187] Lautstärke vor dem letzten Shutdown wird wiederhergestellt. Dies überschreibt die Einstellung der initialen Lautstärke aus der GUI.
I [207] Initiale Lautstärke wurde aus NVS geladen: 3
E [208] Maximale Lautstärke für Lautsprecher wurde ins NVS geschrieben.
E [219] Maximale Lautstärke für Kopfhörer wurde ins NVS geschrieben.
N [219] Lautsprecher ausgeschaltet
I [220] Maximale Lautstärke wurde gesetzt auf: 11
N [232] Neuer Modus: stereo
I [283] Initiale LED-Helligkeit wurde aus NVS geladen: 16
I [283] LED-Helligkeit für Nachtmodus wurde aus NVS geladen: 2
E (307) sdmmc_common: sdmmc_init_ocr: send_op_cond (1) returned 0x107
E (308) vfs_fat_sdmmc: sdmmc_card_init failed (0x107).
[   312][E][SD_MMC.cpp:148] begin(): Failed to initialize the card (0x107). Make sure SD card lines have pull-up resistors in place.
E [323] SD-Karte konnte nicht gemountet werden.
E (857) sdmmc_common: sdmmc_init_ocr: send_op_cond (1) returned 0x107
E (858) vfs_fat_sdmmc: sdmmc_card_init failed (0x107).
[   862][E][SD_MMC.cpp:148] begin(): Failed to initialize the card (0x107). Make sure SD card lines have pull-up resistors in place.
E [873] SD-Karte konnte nicht gemountet werden.
E (1407) sdmmc_common: sdmmc_init_ocr: send_op_cond (1) returned 0x107
E (1408) vfs_fat_sdmmc: sdmmc_card_init failed (0x107).
[  1412][E][SD_MMC.cpp:148] begin(): Failed to initialize the card (0x107). Make sure SD card lines have pull-up resistors in place.
E [1423] SD-Karte konnte nicht gemountet werden.
E (1957) sdmmc_common: sdmmc_init_ocr: send_op_cond (1) returned 0x107
E (1958) vfs_fat_sdmmc: sdmmc_card_init failed (0x107).
[  1962][E][SD_MMC.cpp:148] begin(): Failed to initialize the card (0x107). Make sure SD card lines have pull-up resistors in place.
E [1973] SD-Karte konnte nicht gemountet werden.
E (2507) sdmmc_common: sdmmc_init_ocr: send_op_cond (1) returned 0x107
E (2508) vfs_fat_sdmmc: sdmmc_card_init failed (0x107).
[  2512][E][SD_MMC.cpp:148] begin(): Failed to initialize the card (0x107). Make sure SD card lines have pull-up resistors in place.
E [2524] SD-Karte konnte nicht gemountet werden.
E (3057) sdmmc_common: sdmmc_init_ocr: send_op_cond (1) returned 0x107
E (3058) vfs_fat_sdmmc: sdmmc_card_init failed (0x107).
[  3062][E][SD_MMC.cpp:148] begin(): Failed to initialize the card (0x107). Make sure SD card lines have pull-up resistors in place.
E [3073] SD-Karte konnte nicht gemountet werden.
E (3607) sdmmc_common: sdmmc_init_ocr: send_op_cond (1) returned 0x107
E (3608) vfs_fat_sdmmc: sdmmc_card_init failed (0x107).
[  3612][E][SD_MMC.cpp:148] begin(): Failed to initialize the card (0x107). Make sure SD card lines have pull-up resistors in place.
E [3623] SD-Karte konnte nicht gemountet werden.
E (4157) sdmmc_common: sdmmc_init_ocr: send_op_cond (1) returned 0x107
E (4158) vfs_fat_sdmmc: sdmmc_card_init failed (0x107).
[  4162][E][SD_MMC.cpp:148] begin(): Failed to initialize the card (0x107). Make sure SD card lines have pull-up resistors in place.
E [4174] SD-Karte konnte nicht gemountet werden.
E (4707) sdmmc_common: sdmmc_init_ocr: send_op_cond (1) returned 0x107
E (4708) vfs_fat_sdmmc: sdmmc_card_init failed (0x107).
[  4712][E][SD_MMC.cpp:148] begin(): Failed to initialize the card (0x107). Make sure SD card lines have pull-up resistors in place.
E [4723] SD-Karte konnte nicht gemountet werden.
E (5257) sdmmc_common: sdmmc_init_ocr: send_op_cond (1) returned 0x107
E (5258) vfs_fat_sdmmc: sdmmc_card_init failed (0x107).
[  5262][E][SD_MMC.cpp:148] begin(): Failed to initialize the card (0x107). Make sure SD card lines have pull-up resistors in place.
E [5273] SD-Karte konnte nicht gemountet werden.
E (5807) sdmmc_common: sdmmc_init_ocr: send_op_cond (1) returned 0x107
E (5808) vfs_fat_sdmmc: sdmmc_card_init failed (0x107).
[  5812][E][SD_MMC.cpp:148] begin(): Failed to initialize the card (0x107). Make sure SD card lines have pull-up resistors in place.
E [5823] SD-Karte konnte nicht gemountet werden.
E (6357) sdmmc_common: sdmmc_init_ocr: send_op_cond (1) returned 0x107
E (6358) vfs_fat_sdmmc: sdmmc_card_init failed (0x107).
[  6362][E][SD_MMC.cpp:148] begin(): Failed to initialize the card (0x107). Make sure SD card lines have pull-up resistors in place.
E [6373] SD-Karte konnte nicht gemountet werden.
E (6907) sdmmc_common: sdmmc_init_ocr: send_op_cond (1) returned 0x107
E (6908) vfs_fat_sdmmc: sdmmc_card_init failed (0x107).
[  6912][E][SD_MMC.cpp:148] begin(): Failed to initialize the card (0x107). Make sure SD card lines have pull-up resistors in place.
E [6924] SD-Karte konnte nicht gemountet werden.
E (7457) sdmmc_common: sdmmc_init_ocr: send_op_cond (1) returned 0x107
E (7458) vfs_fat_sdmmc: sdmmc_card_init failed (0x107).
[  7462][E][SD_MMC.cpp:148] begin(): Failed to initialize the card (0x107). Make sure SD card lines have pull-up resistors in place.
E [7473] SD-Karte konnte nicht gemountet werden.
E (8007) sdmmc_common: sdmmc_init_ocr: send_op_cond (1) returned 0x107
E (8008) vfs_fat_sdmmc: sdmmc_card_init failed (0x107).
[  8012][E][SD_MMC.cpp:148] begin(): Failed to initialize the card (0x107). Make sure SD card lines have pull-up resistors in place.
E [8023] SD-Karte konnte nicht gemountet werden.
E (8557) sdmmc_common: sdmmc_init_ocr: send_op_cond (1) returned 0x107
E (8558) vfs_fat_sdmmc: sdmmc_card_init failed (0x107).
[  8562][E][SD_MMC.cpp:148] begin(): Failed to initialize the card (0x107). Make sure SD card lines have pull-up resistors in place.
E [8573] SD-Karte konnte nicht gemountet werden.
E (9107) sdmmc_common: sdmmc_init_ocr: send_op_cond (1) returned 0x107
E (9108) vfs_fat_sdmmc: sdmmc_card_init failed (0x107).
[  9112][E][SD_MMC.cpp:148] begin(): Failed to initialize the card (0x107). Make sure SD card lines have pull-up resistors in place.
E [9124] SD-Karte konnte nicht gemountet werden.
E (9657) sdmmc_common: sdmmc_init_ocr: send_op_cond (1) returned 0x107
E (9658) vfs_fat_sdmmc: sdmmc_card_init failed (0x107).
[  9662][E][SD_MMC.cpp:148] begin(): Failed to initialize the card (0x107). Make sure SD card lines have pull-up resistors in place.
E [9673] SD-Karte konnte nicht gemountet werden.
E (10207) sdmmc_common: sdmmc_init_ocr: send_op_cond (1) returned 0x107
E (10208) vfs_fat_sdmmc: sdmmc_card_init failed (0x107).
[ 10212][E][SD_MMC.cpp:148] begin(): Failed to initialize the card (0x107). Make sure SD card lines have pull-up resistors in place.
E [10224] SD-Karte konnte nicht gemountet werden.
E (10757) sdmmc_common: sdmmc_init_ocr: send_op_cond (1) returned 0x107
E (10758) vfs_fat_sdmmc: sdmmc_card_init failed (0x107).
[ 10762][E][SD_MMC.cpp:148] begin(): Failed to initialize the card (0x107). Make sure SD card lines have pull-up resistors in place.
E [10774] SD-Karte konnte nicht gemountet werden.
E (11307) sdmmc_common: sdmmc_init_ocr: send_op_cond (1) returned 0x107
E (11308) vfs_fat_sdmmc: sdmmc_card_init failed (0x107).
[ 11312][E][SD_MMC.cpp:148] begin(): Failed to initialize the card (0x107). Make sure SD card lines have pull-up resistors in place.
E [11324] SD-Karte konnte nicht gemountet werden.
E (11857) sdmmc_common: sdmmc_init_ocr: send_op_cond (1) returned 0x107
E (11858) vfs_fat_sdmmc: sdmmc_card_init failed (0x107).
[ 11862][E][SD_MMC.cpp:148] begin(): Failed to initialize the card (0x107). Make sure SD card lines have pull-up resistors in place.
E [11874] SD-Karte konnte nicht gemountet werden.
E (12407) sdmmc_common: sdmmc_init_ocr: send_op_cond (1) returned 0x107
E (12408) vfs_fat_sdmmc: sdmmc_card_init failed (0x107).
[ 12412][E][SD_MMC.cpp:148] begin(): Failed to initialize the card (0x107). Make sure SD card lines have pull-up resistors in place.
E [12424] SD-Karte konnte nicht gemountet werden.
E (12957) sdmmc_common: sdmmc_init_ocr: send_op_cond (1) returned 0x107
E (12958) vfs_fat_sdmmc: sdmmc_card_init failed (0x107).
[ 12962][E][SD_MMC.cpp:148] begin(): Failed to initialize the card (0x107). Make sure SD card lines have pull-up resistors in place.
E [12974] SD-Karte konnte nicht gemountet werden.
E (13507) sdmmc_common: sdmmc_init_ocr: send_op_cond (1) returned 0x107
E (13508) vfs_fat_sdmmc: sdmmc_card_init failed (0x107).
[ 13512][E][SD_MMC.cpp:148] begin(): Failed to initialize the card (0x107). Make sure SD card lines have pull-up resistors in place.
E [13524] SD-Karte konnte nicht gemountet werden.
E (14057) sdmmc_common: sdmmc_init_ocr: send_op_cond (1) returned 0x107
E (14058) vfs_fat_sdmmc: sdmmc_card_init failed (0x107).
[ 14062][E][SD_MMC.cpp:148] begin(): Failed to initialize the card (0x107). Make sure SD card lines have pull-up resistors in place.
E [14074] SD-Karte konnte nicht gemountet werden.
E (14607) sdmmc_common: sdmmc_init_ocr: send_op_cond (1) returned 0x107
E (14608) vfs_fat_sdmmc: sdmmc_card_init failed (0x107).
[ 14612][E][SD_MMC.cpp:148] begin(): Failed to initialize the card (0x107). Make sure SD card lines have pull-up resistors in place.
E [14624] SD-Karte konnte nicht gemountet werden.
E (15157) sdmmc_common: sdmmc_init_ocr: send_op_cond (1) returned 0x107
E (15158) vfs_fat_sdmmc: sdmmc_card_init failed (0x107).
[ 15162][E][SD_MMC.cpp:148] begin(): Failed to initialize the card (0x107). Make sure SD card lines have pull-up resistors in place.
E [15174] SD-Karte konnte nicht gemountet werden.
E (15707) sdmmc_common: sdmmc_init_ocr: send_op_cond (1) returned 0x107
E (15708) vfs_fat_sdmmc: sdmmc_card_init failed (0x107).
[ 15712][E][SD_MMC.cpp:148] begin(): Failed to initialize the card (0x107). Make sure SD card lines have pull-up resistors in place.
E [15724] SD-Karte konnte nicht gemountet werden.
E (16257) sdmmc_common: sdmmc_init_ocr: send_op_cond (1) returned 0x107
E (16258) vfs_fat_sdmmc: sdmmc_card_init failed (0x107).
[ 16262][E][SD_MMC.cpp:148] begin(): Failed to initialize the card (0x107). Make sure SD card lines have pull-up resistors in place.
E [16274] SD-Karte konnte nicht gemountet werden.
E (16807) sdmmc_common: sdmmc_init_ocr: send_op_cond (1) returned 0x107
E (16808) vfs_fat_sdmmc: sdmmc_card_init failed (0x107).
[ 16812][E][SD_MMC.cpp:148] begin(): Failed to initialize the card (0x107). Make sure SD card lines have pull-up resistors in place.
E [16824] SD-Karte konnte nicht gemountet werden.
E (17357) sdmmc_common: sdmmc_init_ocr: send_op_cond (1) returned 0x107
E (17358) vfs_fat_sdmmc: sdmmc_card_init failed (0x107).
[ 17362][E][SD_MMC.cpp:148] begin(): Failed to initialize the card (0x107). Make sure SD card lines have pull-up resistors in place.
E [17374] SD-Karte konnte nicht gemountet werden.
E (17907) sdmmc_common: sdmmc_init_ocr: send_op_cond (1) returned 0x107
E (17908) vfs_fat_sdmmc: sdmmc_card_init failed (0x107).
[ 17912][E][SD_MMC.cpp:148] begin(): Failed to initialize the card (0x107). Make sure SD card lines have pull-up resistors in place.
E [17924] SD-Karte konnte nicht gemountet werden.
E (18457) sdmmc_common: sdmmc_init_ocr: send_op_cond (1) returned 0x107
E (18458) vfs_fat_sdmmc: sdmmc_card_init failed (0x107).
[ 18462][E][SD_MMC.cpp:148] begin(): Failed to initialize the card (0x107). Make sure SD card lines have pull-up resistors in place.
E [18474] SD-Karte konnte nicht gemountet werden.
E (19007) sdmmc_common: sdmmc_init_ocr: send_op_cond (1) returned 0x107
E (19008) vfs_fat_sdmmc: sdmmc_card_init failed (0x107).
[ 19012][E][SD_MMC.cpp:148] begin(): Failed to initialize the card (0x107). Make sure SD card lines have pull-up resistors in place.
E [19024] SD-Karte konnte nicht gemountet werden.
E (19557) sdmmc_common: sdmmc_init_ocr: send_op_cond (1) returned 0x107
E (19558) vfs_fat_sdmmc: sdmmc_card_init failed (0x107).
[ 19562][E][SD_MMC.cpp:148] begin(): Failed to initialize the card (0x107). Make sure SD card lines have pull-up resistors in place.
E [19574] SD-Karte konnte nicht gemountet werden.
E [20084] Bootgang wegen SD fehlgeschlagen. Gehe in Deepsleep...
ets Jul 29 2019 12:21:46

rst:0x5 (DEEPSLEEP_RESET),boot:0x17 (SPI_FAST_FLASH_BOOT)
configsip: 0, SPIWP:0xee
clk_drv:0x00,q_drv:0x00,d_drv:0x00,cs0_drv:0x00,hd_drv:0x00,wp_drv:0x00
mode:DIO, clock div:2
load:0x3fff0030,len:1344
load:0x40078000,len:14464
load:0x40080400,len:3652
entry 0x400805f0
E (55) esp_core_dump_flash: No core dump partition found!
E (55) esp_core_dump_flash: No core dump partition found!
I [96] Maximale Inaktivitätszeit wurde aus NVS geladen: 10 Minuten
D [147] RFID-Tags koennen jetzt gescannt werden...
N [148] Port-expander gefunden
N [150] Interrupt für Port-Expander aktiviert
I [151] Zyklus für Batteriemessung fuer Neopixel-Anzeige aus NVS geladen: 10 Minuten
I [162] Unterer Spannungslevel (Batterie) fuer Neopixel-Anzeige aus NVS geladen: 3.00V
I [174] Oberer Spannungslevel (Batterie) fuer Neopixel-Anzeige aus NVS geladen: 4.20V
I [175] Spannungslevel (Batterie) fuer Niedrig-Warnung via Neopixel aus NVS geladen: 3.40V
I [186] Spannungslevel (Batterie) fuer Kritisch-Warnung via Neopixel aus NVS geladen: 3.10V
E [187] Lautstärke vor dem letzten Shutdown wird wiederhergestellt. Dies überschreibt die Einstellung der initialen Lautstärke aus der GUI.
I [207] Initiale Lautstärke wurde aus NVS geladen: 3
E [208] Maximale Lautstärke für Lautsprecher wurde ins NVS geschrieben.
E [219] Maximale Lautstärke für Kopfhörer wurde ins NVS geschrieben.
N [219] Lautsprecher ausgeschaltet
I [230] Maximale Lautstärke wurde gesetzt auf: 11
N [231] Neuer Modus: stereo
I [283] Initiale LED-Helligkeit wurde aus NVS geladen: 16
I [283] LED-Helligkeit für Nachtmodus wurde aus NVS geladen: 2
E (307) sdmmc_common: sdmmc_init_ocr: send_op_cond (1) returned 0x107
E (308) vfs_fat_sdmmc: sdmmc_card_init failed (0x107).
[   312][E][SD_MMC.cpp:148] begin(): Failed to initialize the card (0x107). Make sure SD card lines have pull-up resistors in place.
E [323] SD-Karte konnte nicht gemountet werden.
E (857) sdmmc_common: sdmmc_init_ocr: send_op_cond (1) returned 0x107
E (858) vfs_fat_sdmmc: sdmmc_card_init failed (0x107).
[   862][E][SD_MMC.cpp:148] begin(): Failed to initialize the card (0x107). Make sure SD card lines have pull-up resistors in place.
E [873] SD-Karte konnte nicht gemountet werden.
E (1407) sdmmc_common: sdmmc_init_ocr: send_op_cond (1) returned 0x107
E (1408) vfs_fat_sdmmc: sdmmc_card_init failed (0x107).
[  1412][E][SD_MMC.cpp:148] begin(): Failed to initialize the card (0x107). Make sure SD card lines have pull-up resistors in place.
E [1423] SD-Karte konnte nicht gemountet werden.
E (1957) sdmmc_common: sdmmc_init_ocr: send_op_cond (1) returned 0x107
E (1958) vfs_fat_sdmmc: sdmmc_card_init failed (0x107).
[  1962][E][SD_MMC.cpp:148] begin(): Failed to initialize the card (0x107). Make sure SD card lines have pull-up resistors in place.
E [1973] SD-Karte konnte nicht gemountet werden.
E (2507) sdmmc_common: sdmmc_init_ocr: send_op_cond (1) returned 0x107
E (2508) vfs_fat_sdmmc: sdmmc_card_init failed (0x107).
[  2512][E][SD_MMC.cpp:148] begin(): Failed to initialize the card (0x107). Make sure SD card lines have pull-up resistors in place.
E [2524] SD-Karte konnte nicht gemountet werden.
E (3057) sdmmc_common: sdmmc_init_ocr: send_op_cond (1) returned 0x107
E (3058) vfs_fat_sdmmc: sdmmc_card_init failed (0x107).
[  3062][E][SD_MMC.cpp:148] begin(): Failed to initialize the card (0x107). Make sure SD card lines have pull-up resistors in place.
E
1 „Gefällt mir“